Tag Archives: Airbrushing

How To do Airbrushing – Natural Smooth Skin

How To do Airbrushing – Natural Smooth Skin

Seeing how Airbrushing is very popular, I thought I should add another technique . . . .

Airbrushing - Natural Smooth Skin Photoshop Tutorial

In this tutorial, we’ll teach you an effective Photoshop technique to simulate airbrushing without losing the texture.

Airbrushing – Natural Smooth Skin Photoshop Tutorial

Step 1

First, go to the File menu and select Open to open a photo you would like to edit. Because we will be working with fine details, it is important that the image is a high resolution image/photo so that the details of the skin can be seen. Like the pores in the skin, etc. The image I used is a high resolution 10 mega-pixel image with plenty of skin detail.

Adobe Photoshop CS2

Step 2

In the next steps, we will be duplicating the layer twice and applying two filters to each of the new layers. Because the image I am working with is a large 31MB photo, processing the filters will be CPU intensive and slow, depending on what computer you have. I’m using a QUAD CORE with 4GB memory spare, so its actually not that bad, but it does depend on your computer set-up.

Before I continue to duplicate the layer, I’m going to use the Lasso tool to draw a selection of the skin and duplicate only that area. This will reduce the amount of pixels to work with and reduce the load on my computer. You don’t have to do this if you don’t need to. It may be helpful if you don’t have a fast computer with lots of RAM or if your image isn’t really large.

Photoshop Selection

Step 3

Now, press Ctrl+J or open Layer menu and select Duplicate to duplicate the layer. Do this once more so that you have two layers. Now, rename the top layer to “High Pass” and the middle layer to “Low Pass”. As you may have guessed, on the High Pass layer, we’ll be applying a high pass filter and on the Low Pass layer, we’ll be applying a low pass filter.

Photoshop Layers Palette

Step 4

Lets work on the Low Pass layer first. In the Layers palette, click on the eye beside the High Pass layer to hide the layer and select the Low Pass layer that we will be working on.

Photoshop Layers Palette

Step 5

Instead of applying a low pass filter, also known as the Gaussian blur filter, we’ll be using the Surface Blur filter instead. Select the Filter> Blur menu and choose Surface Blur. The surface blur filter blurs the image but preserves the edges. It is great for smoothing skin without losing the edges. The Surface Blur provides two options:

  • Radius:
    This setting specifies the size or strength of the blur. Use a higher setting for larger images.
    “The Radius option specifies the size of the area sampled for the blur.”
    Adobe Help Centre
  • Threshold:
    This setting allows you to define the area to blur.
    “The Threshold option controls how much the tonal values of neighbouring pixels must diverge from the centre pixel value before being part of the blur. Pixels with tonal value differences less than the Threshold value are excluded from the blur.”
    – Adobe Help Centre

First, set the radius and threshold so that the image becomes blurry but still recognizable. Then, lower the Threshold and stop just when the edges become sharp. Now adjust the Radius so that the skin is smooth.

Photoshop Surface Blur

Step 6

We’re done with the Low Pass layer. Now we’ll work on the High Pass layer that’ll restore the tiny details such as the bumps and pores. Select the layer, click on the eye beside the High Pass layer, and change the layer blending mode to Linear Light.

The tiny bumps of the skin is most visible on the neutral tones of the skin and least visible on the dark tones of the skin. To simulate this natural effect, we’ll add a layer mask that will reduce the visibility of the bumps on the darker tones of the image. Add a layer mask by clicking the Layer Mask Button button or by going to the Layer> Layer Mask menu and selecting Reveal All.

Layer Mask

Step 7

Now we’ll use the Apply Image tool to apply a copy of the image in the layer mask. Now we have a layer mask that defines and reduces the effect in those dark areas.

Apply Image

Step 8

We’re done with the layer mask, so click on the thumbnail of the layer (not the layer mask).

Click

Step 9

We will be using the High Pass filter next. The next step will require a lot of precise adjustments, so before we proceed, zoom in 100% on somewhere near the skin.

Photoshop

Step 10

Expand the Filter> Other menu and select the High Pass filter. In the High Pass filter, adjust the Radius in small increments until the skin looks natural.

Tip: Click on the Radius field and press the up and down button to quickly increase or decrease the effect.

“High Pass retains edge details in the specified radius where sharp colour transitions occur and suppresses the rest of the image. (A radius of 0.1 pixel keeps only edge pixels.) The filter removes low-frequency detail in an image and has an effect opposite to that of the Gaussian Blur filter.”

Adobe Help Centre

Photoshop High Pass Filter

Step 11

Now we’ll go back and tweak the settings of the layer mask. In the layers palette, click on the thumbnail of the layer mask to activate it. Then, go to the Image> Adjustments menu and select Brightness/Contrast. In the Brightness/Contrast tool, increase the contrast and adjust the brightness so that the bumps on the skin is less visible on the dark areas and more visible on the bright areas.

Photoshop Brightness/Contrast

Correct Skin Texture

Step 12

We’re done smoothing the skin, but now the whole image is smooth. We need to use a layer mask to erase the effect from the areas that are not the skin. Select the top two layers and press Ctrl+G or go to the Layers menu and select Group Layers to group the layers. Then, add a layer mask by going into the Layers> Layer Mask menu and selecting Hide All.

Grouped Layers

Step 13

You should now see back the image the way it originally was without the smooth skin effect. We will be painting the layer mask over the skin. But because this effect is subtle, it may be difficult to see where we have painted over. So before we paint the layer mask, add a new layer above the High Pass layer and fill it with the colour red. Then, change the opacity of the red layer to 50%.

Outline Layer

Step 14

Select back the Group layer mask by clicking on the black thumbnail in the layers palette. Select the brush tool and paint over the skin to make the smooth skin effect visible over those areas that you paint. To change the setting of the brush, right mouse click anywhere and the Brush settings will appear. Start with large diameter and a hardness about 50. Then, fill in the tiny spots with a smaller brush. You don’t have to be too precise with this step. Minor flaws will not be noticeable.

Tip: To quickly change the brush size, press the [ key to decrease the brush size and the ] key to increase the brush size.

Layer Mask Painting

Layer Mask

Step 15

Delete the red fill layer when you’re done.

Final Results

Roll-over the images to see the before and after effect. It may take awhile for the images to load.

Airbrushing - Natrual Smooth Skin Photoshop Tutorial

Airbrushing - Natrual Smooth Skin Photoshop Tutorial

Airbrushing - Natrual Smooth Skin Photoshop Tutorial

If this tutorial has helped you, please consider helping me out to keep doing wicked tutorials.

Donate bitcoins

14Wv3Ppe7d8Z86EDMhgYKdScf6JAm545tW

Please consider supporting this site as all the tutorials are free, the donations so far have kept the site alive, I cant say thanks enough ... Thanks again!